From Linux Man Pages
ipv6, PF_INET6 - Linux IPv6 protocol implementation
SYNOPSIS
#include <sys/socket.h>
#include <netinet/in.h>
tcp6_socket = socket(PF_INET6, SOCK_STREAM, 0);
raw6_socket = socket(PF_INET6, SOCK_RAW, protocol);
udp6_socket = socket(PF_INET6, SOCK_DGRAM, protocol);
DESCRIPTION
Linux 2.2 optionally implements the Internet Protocol, version 6. This man page contains a description of the
IPv6 basic API as implemented by the Linux kernel and glibc 2.1. The interface is based on the BSD sockets inter-
face; see socket(7).
The IPv6 API aims to be mostly compatible with the ip(7) v4 API. Only differences are described in this man page.
To bind an AF_INET6 socket to any process the local address should be copied from the in6addr_any variable which
has in6_addr type. In static initializations IN6ADDR_ANY_INIT may also be used, which expands to a constant
expression. Both of them are in network order.
The IPv6 loopback address (::1) is available in the global in6addr_loopback variable. For initializations
IN6ADDR_LOOPBACK_INIT should be used.
IPv4 connections can be handled with the v6 API by using the v4-mapped-on-v6 address type; thus a program only
needs only to support this API type to support both protocols. This is handled transparently by the address han-
dling functions in libc.
IPv4 and IPv6 share the local port space. When you get an IPv4 connection or packet to a IPv6 socket its source
address will be mapped to v6 and it'll be mapped to v6.
ADDRESS FORMAT
struct sockaddr_in6 {
u_int16_t sin6_family;/* AF_INET6 */
u_int16_t sin6_port;/* port number */
u_int32_t sin6_flowinfo;/* IPv6 flow information */
struct in6_addr sin6_addr;/* IPv6 address */
u_int32_t sin6_scope_id; /* Scope ID (new in 2.4) */
};
struct in6_addr {
unsigned char s6_addr[16];/* IPv6 address */
};
sin6_family is always set to AF_INET6; sin6_port is the protocol port (see sin_port in ip(7)); sin6_flowinfo is
the IPv6 flow identifier; sin6_addr is the 128bit IPv6 address. sin6_scope_id is an ID of depending of on the
scope of the address. It is new in Linux 2.4. Linux only supports it for link scope addresses, in that case
sin6_scope_id contains the interface index (see netdevice(7))
IPv6 supports several address types: unicast to address a single host, multicast to address a group of hosts,
anycast to address the nearest member of a group of hosts (not implemented in Linux), IPv4-on-IPv6 to address a
IPv4 host, and other reserved address types.
The address notation for IPv6 is a group of 16 2 digit hexadecimal numbers, separated with a ':'. '::' stands for
a string of 0 bits. Special addresses are ::1 for loopback and ::FFFF:<IPv4 address> for IPv4-mapped-on-IPv6.
The port space of IPv6 is shared with IPv4.
SOCKET OPTIONS
IPv6 supports some protocol specific socket options that can be set with setsockopt(2) and read with getsock-
opt(2). The socket option level for IPv6 is IPPROTO_IPV6. A boolean integer flag is zero when it is false,
otherwise true.
IPV6_ADDRFORM
Turn an AF_INET6 socket into a socket of a different address family. Only AF_INET is currently supported
for that. It is only allowed for IPv6 sockets that are connected and bound to a v4-mapped-on-v6 address.
The argument is a pointer to a integer containing AF_INET. This is useful to pass v4-mapped sockets as
file descriptors to programs that don't know how to deal with the IPv6 API.
IPV6_ADD_MEMBERSHIP, IPV6_DROP_MEMBERSHIP
Control membership in multicast groups. Argument is a pointer to a struct ipv6_mreq structure.
IPV6_MTU
Set the MTU to be used for the socket. The MTU is limited by the device MTU or the path mtu when path mtu
discovery is enabled. Argument is a pointer to integer.
IPV6_MTU_DISCOVER
Control path mtu discovery on the socket. See IP_MTU_DISCOVER in ip(7) for details.
IPV6_MULTICAST_HOPS
Set the multicast hop limit for the socket. Argument is a pointer to an integer. -1 in the value means
use the route default, otherwise it should be between 0 and 255.
IPV6_MULTICAST_IF
Set the device for outgoing multicast packets on the socket. This is only allowed for SOCK_DGRAM and
SOCK_RAW socket. The argument is an pointer to an interface index (see netdevice(7)) in an integer.
IPV6_MULTICAST_LOOP
Control whether the socket sees multicast packets that it has send itself. Argument is a pointer to
boolean.
IPV6_PKTINFO
Set delivery of the IPV6_PKTINFO control message on incoming datagrams. Only allowed for SOCK_DGRAM or
SOCK_RAW sockets. Argument is a pointer to a boolean value in an integer.
IPV6_RTHDR, IPV6_AUTHHDR, IPV6_DSTOPS, IPV6_HOPOPTS, IPV6_FLOWINFO, IPV6_HOPLIMIT
Set delivery of control messages for incoming datagrams containing extension headers from the received
packet. IPV6_RTHDR delivers the routing header, IPV6_AUTHHDR delivers the authentication header,
IPV6_DSTOPTS delivers the destination options, IPV6_HOPOPTS delivers the hop options, IPV6_FLOWINFO deliv-
ers an integer containing the flow ID, IPV6_HOPLIMIT delivers an integer containing the hop count of the
packet. The control messages have the same type as the socket option. All these header options can also
be set for outgoing packets by putting the appropriate control message into the control buffer of
sendmsg(2). Only allowed for SOCK_DGRAM or SOCK_RAW sockets. Argument is a pointer to a boolean value.
IPV6_RECVERR
Control receiving of asynchronous error options. See IP_RECVERR in ip(7) for details. Argument is a
pointer to boolean.
IPV6_ROUTER_ALERT
Pass all forwarded packets containing an router alert option to this socket. Only allowed for datagram
sockets and for root. Argument is a pointer to boolean.
IPV6_UNICAST_HOPS
Set the unicast hop limit for the socket. Argument is an pointer to an integer. -1 in the value means use
the route default, otherwise it should be between 0 and 255.
VERSIONS
The older libinet6 libc5 based IPv6 API implementation for Linux is not described here and may vary in details.
Linux 2.4 will break binary compatibility for the sockaddr_in6 for 64bit hosts by changing the alignment of
in6_addr and adding an additional sin6_scope_id field. The kernel interfaces stay compatible, but a program in-
cluding sockaddr_in6 or in6_addr into other structures may not be. This is not a problem for 32bit hosts like
i386.
The sin6_flowinfo field is new in Linux 2.4. It is transparently passed/read by the kernel when the passed ad-
dress length contains it. Some programs that pass a longer address buffer and then check the outgoing address
length may break.
PORTING NOTES
The sockaddr_in6 structure is bigger than the generic sockaddr. Programs that assume that all address types can
be stored safely in a struct sockaddr need to be changed to use struct sockaddr_storage for that instead.
BUGS
The IPv6 extended API as in RFC 2292 is currently only partly implemented; although the 2.2 kernel has near com-
plete support for receiving options, the macros for generating IPv6 options are missing in glibc 2.1.
IPSec support for EH and AH headers is missing.
Flow label management is not complete and not documented here.
This man page is not complete.
RELATED
cmsg(3), ip(7)
RFC 2553: IPv6 BASIC API. Linux tries to be compliant to this.
RFC 2460: IPv6 specification.
CATEGORY