8:mount
From Linux Man Pages
mount - mount a file system
SYNOPSIS
mount [-lhV]
mount -a [-fFnrsvw] [-t vfstype] [-O optlist]
mount [-fnrsvw] [-o options [,...]] device | dir
mount [-fnrsvw] [-t vfstype] [-o options] device dir
DESCRIPTION
All files accessible in a Unix system are arranged in one big tree, the file hierarchy, rooted at /. These files
can be spread out over several devices. The mount command serves to attach the file system found on some device
to the big file tree. Conversely, the umount(8) command will detach it again.
The standard form of the mount command, is
mount -t type device dir
This tells the kernel to attach the file system found on device (which is of type type) at the directory dir.
The previous contents (if any) and owner and mode of dir become invisible, and as long as this file system
remains mounted, the pathname dir refers to the root of the file system on device.
Three forms of invocation do not actually mount anything:
mount -h
prints a help message;
mount -V
prints a version string; and just
mount [-l] [-t type]
lists all mounted file systems (of type type). The option -l adds the (ext2, ext3 and XFS) labels in this list-
ing. See below.
Since Linux 2.4.0 it is possible to remount part of the file hierarchy somewhere else. The call is
mount --bind olddir newdir
After this call the same contents is accessible in two places. One can also remount a single file (on a single
file).
This call attaches only (part of) a single filesystem, not possible submounts. The entire file hierarchy includ-
ing submounts is attached a second place using
mount --rbind olddir newdir
Note that the filesystem mount options will remain the same as those on the original mount point, and cannot be
changed by passing the -o option along with --bind/--rbind.
Since Linux 2.5.1 it is possible to atomically move a mounted tree to another place. The call is
mount --move olddir newdir
The proc file system is not associated with a special device, and when mounting it, an arbitrary keyword, such as
proc can be used instead of a device specification. (The customary choice none is less fortunate: the error mes-
sage `none busy' from umount can be confusing.)
Most devices are indicated by a file name (of a block special device), like /dev/sda1, but there are other possi-
bilities. For example, in the case of an NFS mount, device may look like knuth.cwi.nl:/dir. It is possible to
indicate a block special device using its volume label or UUID (see the -L and -U options below).
The file /etc/fstab (see fstab(5)), may contain lines describing what devices are usually mounted where, using
which options. This file is used in three ways:
(i) The command
mount -a [-t type] [-O optlist]
(usually given in a bootscript) causes all file systems mentioned in fstab (of the proper type and/or having or
not having the proper options) to be mounted as indicated, except for those whose line contains the noauto key-
word. Adding the -F option will make mount fork, so that the filesystems are mounted simultaneously.
(ii) When mounting a file system mentioned in fstab, it suffices to give only the device, or only the mount
point.
(iii) Normally, only the superuser can mount file systems. However, when fstab contains the user option on a
line, anybody can mount the corresponding system.
Thus, given a line
/dev/cdrom /cd iso9660 ro,user,noauto,unhide
any user can mount the iso9660 file system found on his CDROM using the command
mount /dev/cdrom
or
mount /cd
For more details, see fstab(5). Only the user that mounted a filesystem can unmount it again. If any user
should be able to unmount, then use users instead of user in the fstab line. The owner option is similar to the
user option, with the restriction that the user must be the owner of the special file. This may be useful e.g.
for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the
restriction that the user must be member of the group of the special file.
The programs mount and umount maintain a list of currently mounted file systems in the file /etc/mtab. If no
arguments are given to mount, this list is printed.
When the proc filesystem is mounted (say at /proc), the files /etc/mtab and /proc/mounts have very similar con-
tents. The former has somewhat more information, such as the mount options used, but is not necessarily up-to-
date (cf. the -n option below). It is possible to replace /etc/mtab by a symbolic link to /proc/mounts, and espe-
cially when you have very large numbers of mounts things will be much faster with that symlink, but some informa-
tion is lost that way, and in particular working with the loop device will be less convenient, and using the
"user" option will fail.
OPTIONS
The full set of options used by an invocation of mount is determined by first extracting the options for the file
system from the fstab table, then applying any options specified by the -o argument, and finally applying a -r or
-w option, when present.
Options available for the mount command:
-V Output version.
-h Print a help message.
-v Verbose mode.
-p passwdfd
If the mount requires a passphrase to be entered, read it from file descriptor passwdfd instead of from
the terminal. If mount uses encrypted loop device and gpgkey= mount option is not being used (no gpg key
file), then mount attempts to read 65 keys from passwdfd, each key at least 20 characters and separated by
newline. If mount successfully reads 64 or 65 keys, then loop device is put to multi-key mode. If mount
encounters end-of-file before 64 keys are read, then only first key is used in single-key mode.
-a Mount all filesystems (of the given types) mentioned in fstab.
-F (Used in conjunction with -a.) Fork off a new incarnation of mount for each device. This will do the
mounts on different devices or different NFS servers in parallel. This has the advantage that it is
faster; also NFS timeouts go in parallel. A disadvantage is that the mounts are done in undefined order.
Thus, you cannot use this option if you want to mount both /usr and /usr/spool.
-f Causes everything to be done except for the actual system call; if it's not obvious, this ``fakes mount-
ing the file system. This option is useful in conjunction with the -v flag to determine what the mount
command is trying to do. It can also be used to add entries for devices that were mounted earlier with the
-n option.
-i Don't call the /sbin/mount.<filesystem> helper even if it exists.
-l Add the ext2, ext3 and XFS labels in the mount output. Mount must have permission to read the disk device
(e.g. be suid root) for this to work. One can set such a label for ext2 or ext3 using the e2label(8)
utility, or for XFS using xfs_admin(8), or for reiserfs using reiserfstune(8).
-n Mount without writing in /etc/mtab. This is necessary for example when /etc is on a read-only file sys-
tem.
-s Tolerate sloppy mount options rather than failing. This will ignore mount options not supported by a
filesystem type. Not all filesystems support this option. This option exists for support of the Linux aut-
ofs-based automounter.
-r Mount the file system read-only. A synonym is -o ro.
-w Mount the file system read/write. This is the default. A synonym is -o rw.
-L label
Mount the partition that has the specified label.
-U uuid
Mount the partition that has the specified uuid. These two options require the file /proc/partitions
(present since Linux 2.1.116) to exist.
-t vfstype
The argument following the -t is used to indicate the file system type. The file system types which are
currently supported include: adfs, affs, autofs, cifs, coda, coherent, cramfs, devpts, efs, ext, ext2,
ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, ramfs, reiserfs, romfs, smbfs,
sysv, tmpfs, udf, ufs, umsdos, usbfs, vfat, xenix, xfs, xiafs. Note that coherent, sysv and xenix are
equivalent and that xenix and coherent will be removed at some point in the future -- use sysv instead.
Since kernel version 2.1.21 the types ext and xiafs do not exist anymore. Earlier, usbfs was known as usb-
devfs.
For most types all the mount program has to do is issue a simple mount(2) system call, and no detailed
knowledge of the filesystem type is required. For a few types however (like nfs, cifs, smbfs, ncpfs) ad
hoc code is necessary. The nfs ad hoc code is built in, but cifs, smbfs, and ncpfs have a separate mount
program. In order to make it possible to treat all types in a uniform way, mount will execute the program
/sbin/mount.TYPE (if that exists) when called with type TYPE. Since various versions of the smbmount pro-
gram have different calling conventions, /sbin/mount.smbfs may have to be a shell script that sets up the
desired call.
If no -t option is given, or if the auto type is specified, mount will try to guess the desired type. If
mount was compiled with the blkid library, the guessing is done by this library. Otherwise, mount guesses
itself by probing the superblock; if that does not turn up anything that looks familiar, mount will try to
read the file /etc/filesystems, or, if that does not exist, /proc/filesystems. All of the filesystem
types listed there will be tried, except for those that are labeled "nodev" (e.g., devpts, proc and nfs).
If /etc/filesystems ends in a line with a single * only, mount will read /proc/filesystems afterwards.
The auto type may be useful for user-mounted floppies. Creating a file /etc/filesystems can be useful to
change the probe order (e.g., to try vfat before msdos or ext3 before ext2) or if you use a kernel module
autoloader. Warning: the probing uses a heuristic (the presence of appropriate `magic'), and could recog-
nize the wrong filesystem type, possibly with catastrophic consequences. If your data is valuable, don't
ask mount to guess.
More than one type may be specified in a comma separated list. The list of file system types can be pre-
fixed with no to specify the file system types on which no action should be taken. (This can be meaning-
ful with the -a option.)
For example, the command:
mount -a -t nomsdos,ext
mounts all file systems except those of type msdos and ext.
-O Used in conjunction with -a, to limit the set of filesystems to which the -a is applied. Like -t in this
regard except that it is useless except in the context of -a. For example, the command:
mount -a -O no_netdev
mounts all file systems except those which have the option _netdev specified in the options field in the
/etc/fstab file.
It is different from -t in that each option is matched exactly; a leading no at the beginning of one
option does not negate the rest.
The -t and -O options are cumulative in effect; that is, the command
mount -a -t ext2 -O _netdev
mounts all ext2 filesystems with the _netdev option, not all filesystems that are either ext2 or have the
_netdev option specified.
-o Options are specified with a -o flag followed by a comma separated string of options. Some of these
options are only useful when they appear in the /etc/fstab file. The following options apply to any file
system that is being mounted (but not every file system actually honors them - e.g., the sync option today
has effect only for ext2, ext3 and ufs):
async All I/O to the file system should be done asynchronously.
atime Update inode access time for each access. This is the default.
auto Can be mounted with the -a option.
defaults
Use default options: rw, suid, dev, exec, auto, nouser, and async.
dev Interpret character or block special devices on the file system.
exec Permit execution of binaries.
group Allow an ordinary (i.e., non-root) user to mount the file system if one of his groups matches the
group of the device. This option implies the options nosuid and nodev (unless overridden by subse-
quent options, as in the option line group,dev,suid).
hotplug
Do not report errors for this device if it doesn't exist. fcntl(2).
mand Allow mandatory locks on this filesystem. See fcntl(2).
_netdev
The filesystem resides on a device that requires network access (used to prevent the system from
attempting to mount these filesystems until the network has been enabled on the system).
noatime
Do not update inode access times on this file system (e.g, for faster access on the news spool to
speed up news servers).
nodiratime
Do not update directory inode access times on this filesystem.
noauto Can only be mounted explicitly (i.e., the -a option will not cause the file system to be mounted).
nodev Do not interpret character or block special devices on the file system.
noexec Do not allow direct execution of any binaries on the mounted file system. (Until recently it was
possible to run binaries anyway using a command like /lib/ld*.so /mnt/binary. This trick fails
since Linux 2.4.25 / 2.6.0.)
nohotplug
Report an error if the device does not exist.
nomand Do not allow mandatory locks on this filesystem.
nosuid Do not allow set-user-identifier or set-group-identifier bits to take effect. (This seems safe, but
is in fact rather unsafe if you have suidperl(1) installed.)
nouser Forbid an ordinary (i.e., non-root) user to mount the file system. This is the default.
owner Allow an ordinary (i.e., non-root) user to mount the file system if he is the owner of the device.
This option implies the options nosuid and nodev (unless overridden by subsequent options, as in
the option line owner,dev,suid).
remount
Attempt to remount an already-mounted file system. This is commonly used to change the mount flags
for a file system, especially to make a readonly file system writeable. It does not change device
or mount point.
ro Mount the file system read-only.
rw Mount the file system read-write.
suid Allow set-user-identifier or set-group-identifier bits to take effect.
sync All I/O to the file system should be done synchronously.
dirsync
All directory updates within the file system should be done synchronously. This affects the fol-
lowing system calls: creat, link, unlink, symlink, mkdir, rmdir, mknod and rename.
user Allow an ordinary user to mount the file system. The name of the mounting user is written to mtab
so that he can unmount the file system again. This option implies the options noexec, nosuid, and
nodev (unless overridden by subsequent options, as in the option line user,exec,dev,suid).
users Allow every user to mount and unmount the file system. This option implies the options noexec,
nosuid, and nodev (unless overridden by subsequent options, as in the option line
users,exec,dev,suid).
--bind Remount a subtree somewhere else (so that its contents are available in both places). See above.
--move Move a subtree to some other place. See above.
FILESYSTEM SPECIFIC MOUNT OPTIONS
The following options apply only to certain file systems. We sort them by file system. They all follow the -o
flag.
What options are supported depends a bit on the running kernel. More info may be found in the kernel source sub-
directory Documentation/filesystems.
Mount options for adfs
uid=value and gid=value
Set the owner and group of the files in the file system (default: uid=gid=0).
ownmask=value and othmask=value
Set the permission mask for ADFS 'owner' permissions and 'other' permissions, respectively (default: 0700
and 0077, respectively). See also /usr/src/linux/Documentation/filesystems/adfs.txt.
Mount options for affs
uid=value and gid=value
Set the owner and group of the root of the file system (default: uid=gid=0, but with option uid or gid
without specified value, the uid and gid of the current process are taken).
setuid=value and setgid=value
Set the owner and group of all files.
mode=value
Set the mode of all files to value & 0777 disregarding the original permissions. Add search permission to
directories that have read permission. The value is given in octal.
protect
Do not allow any changes to the protection bits on the file system.
usemp Set uid and gid of the root of the file system to the uid and gid of the mount point upon the first sync
or umount, and then clear this option. Strange...
verbose
Print an informational message for each successful mount.
prefix=string
Prefix used before volume name, when following a link.
volume=string
Prefix (of length at most 30) used before '/' when following a symbolic link.
reserved=value
(Default: 2.) Number of unused blocks at the start of the device.
root=value
Give explicitly the location of the root block.
bs=value
Give blocksize. Allowed values are 512, 1024, 2048, 4096.
grpquota / noquota / quota / usrquota
These options are accepted but ignored. (However, quota utilities may react to such strings in
/etc/fstab.)
Mount options for cifs
See the options section of the mount.cifs(8) man page (cifs-mount package must be installed).
Mount options for coherent
None.
Mount options for devpts
The devpts file system is a pseudo file system, traditionally mounted on /dev/pts. In order to acquire a pseudo
terminal, a process opens /dev/ptmx; the number of the pseudo terminal is then made available to the process and
the pseudo terminal slave can be accessed as /dev/pts/<number>.
uid=value and gid=value
This sets the owner or the group of newly created PTYs to the specified values. When nothing is specified,
they will be set to the UID and GID of the creating process. For example, if there is a tty group with
GID 5, then gid=5 will cause newly created PTYs to belong to the tty group.
mode=value
Set the mode of newly created PTYs to the specified value. The default is 0600. A value of mode=620 and
gid=5 makes "mesg y" the default on newly created PTYs.
Mount options for ext
None. Note that the `ext' file system is obsolete. Don't use it. Since Linux version 2.1.21 extfs is no longer
part of the kernel source.
Mount options for ext2
The `ext2' file system is the standard Linux file system. Since Linux 2.5.46, for most mount options the default
is determined by the filesystem superblock. Set them with tune2fs(8).
acl / noacl
Support POSIX Access Control Lists (or not).
bsddf / minixdf
Set the behaviour for the statfs system call. The minixdf behaviour is to return in the f_blocks field the
total number of blocks of the file system, while the bsddf behaviour (which is the default) is to subtract
the overhead blocks used by the ext2 file system and not available for file storage. Thus
% mount /k -o minixdf; df /k; umount /k
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/sda6 2630655 86954 2412169 3% /k
% mount /k -o bsddf; df /k; umount /k
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/sda6 2543714 13 2412169 0% /k
(Note that this example shows that one can add command line options to the options given in /etc/fstab.)
check Check filesystem (block and inode bitmaps) at mount time.
check=none / nocheck
No checking is done at mount time. This is the default. This is fast. It is wise to invoke e2fsck(8)
every now and then, e.g. at boot time.
debug Print debugging info upon each (re)mount.
errors=continue / errors=remount-ro / errors=panic
Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system
erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default
is set in the filesystem superblock, and can be changed using tune2fs(8).
grpid or bsdgroups / nogrpid or sysvgroups
These options define what group id a newly created file gets. When grpid is set, it takes the group id of
the directory in which it is created; otherwise (the default) it takes the fsgid of the current process,
unless the directory has the setgid bit set, in which case it takes the gid from the parent directory, and
also gets the setgid bit set if it is a directory itself.
grpquota / noquota / quota / usrquota
These options are accepted but ignored.
nobh Do not attach buffer_heads to file pagecache. (Since 2.5.49.)
nouid32
Disables 32-bit UIDs and GIDs. This is for interoperability with older kernels which only store and
expect 16-bit values.
oldalloc or orlov
Use old allocator or Orlov allocator for new inodes. Orlov is default.
resgid=n and resuid=n
The ext2 file system reserves a certain percentage of the available space (by default 5%, see mke2fs(8)
and tune2fs(8)). These options determine who can use the reserved blocks. (Roughly: whoever has the
specified uid, or belongs to the specified group.)
sb=n Instead of block 1, use block n as superblock. This could be useful when the filesystem has been damaged.
(Earlier, copies of the superblock would be made every 8192 blocks: in block 1, 8193, 16385, ... (and one
got thousands of copies on a big filesystem). Since version 1.08, mke2fs has a -s (sparse superblock)
option to reduce the number of backup superblocks, and since version 1.15 this is the default. Note that
this may mean that ext2 filesystems created by a recent mke2fs cannot be mounted r/w under Linux 2.0.*.)
The block number here uses 1k units. Thus, if you want to use logical block 32768 on a filesystem with 4k
blocks, use "sb=131072".
user_xattr / nouser_xattr
Support "user." extended attributes (or not).
Mount options for ext3
The `ext3' file system is a version of the ext2 file system which has been enhanced with journalling. It sup-
ports the same options as ext2 as well as the following additions:
journal=update
Update the ext3 file system's journal to the current format.
journal=inum
When a journal already exists, this option is ignored. Otherwise, it specifies the number of the inode
which will represent the ext3 file system's journal file; ext3 will create a new journal, overwriting the
old contents of the file whose inode number is inum.
noload Do not load the ext3 file system's journal on mounting.
data=journal / data=ordered / data=writeback
Specifies the journalling mode for file data. Metadata is always journaled. To use modes other than
ordered on the root file system, pass the mode to the kernel as boot parameter, e.g. rootflags=data=jour-
nal.
journal
All data is committed into the journal prior to being written into the main file system.
ordered
This is the default mode. All data is forced directly out to the main file system prior to its
metadata being committed to the journal.
writeback
Data ordering is not preserved - data may be written into the main file system after its metadata
has been committed to the journal. This is rumoured to be the highest-throughput option. It
guarantees internal file system integrity, however it can allow old data to appear in files after a
crash and journal recovery.
commit=nrsec
Sync all data and metadata every nrsec seconds. The default value is 5 seconds. Zero means default.
user_xattr
Enable Extended User Attributes. See the attr(5) manual page.
acl Enable POSIX Access Control Lists. See the acl(5) manual page.
Mount options for fat
(Note: fat is not a separate filesystem, but a common part of the msdos, umsdos and vfat filesystems.)
blocksize=512 / blocksize=1024 / blocksize=2048
Set blocksize (default 512).
uid=value and gid=value
Set the owner and group of all files. (Default: the uid and gid of the current process.)
umask=value
Set the umask (the bitmask of the permissions that are not present). The default is the umask of the cur-
rent process. The value is given in octal.
dmask=value
Set the umask applied to directories only. The default is the umask of the current process. The value is
given in octal.
fmask=value
Set the umask applied to regular files only. The default is the umask of the current process. The value
is given in octal.
check=value
Three different levels of pickyness can be chosen:
r[elaxed]
Upper and lower case are accepted and equivalent, long name parts are truncated (e.g. verylong-
name.foobar becomes verylong.foo), leading and embedded spaces are accepted in each name part (name
and extension).
n[ormal]
Like "relaxed", but many special characters (*, ?, <, spaces, etc.) are rejected. This is the
default.
s[trict]
Like "normal", but names may not contain long parts and special characters that are sometimes used
on Linux, but are not accepted by MS-DOS are rejected. (+, =, spaces, etc.)
codepage=value
Sets the codepage for converting to shortname characters on FAT and VFAT filesystems. By default, codepage
437 is used.
conv=b[inary] / conv=t[ext] / conv=a[uto]
The fat file system can perform CRLF<-->NL (MS-DOS text format to UNIX text format) conversion in the ker-
nel. The following conversion modes are available:
binary no translation is performed. This is the default.
text CRLF<-->NL translation is performed on all files.
auto CRLF<-->NL translation is performed on all files that don't have a "well-known binary" extension.
The list of known extensions can be found at the beginning of fs/fat/misc.c (as of 2.0, the list
is: exe, com, bin, app, sys, drv, ovl, ovr, obj, lib, dll, pif, arc, zip, lha, lzh, zoo, tar, z,
arj, tz, taz, tzp, tpz, gz, tgz, deb, gif, bmp, tif, gl, jpg, pcx, tfm, vf, gf, pk, pxl, dvi).
Programs that do computed lseeks won't like in-kernel text conversion. Several people have had their data
ruined by this translation. Beware!
For file systems mounted in binary mode, a conversion tool (fromdos/todos) is available.
cvf_format=module
Forces the driver to use the CVF (Compressed Volume File) module cvf_module instead of auto-detection. If
the kernel supports kmod, the cvf_format=xxx option also controls on-demand CVF module loading.
cvf_option=option
Option passed to the CVF module.
debug Turn on the debug flag. A version string and a list of file system parameters will be printed (these data
are also printed if the parameters appear to be inconsistent).
fat=12 / fat=16 / fat=32
Specify a 12, 16 or 32 bit fat. This overrides the automatic FAT type detection routine. Use with cau-
tion!
iocharset=value
Character set to use for converting between 8 bit characters and 16 bit Unicode characters. The default is
iso8859-1. Long filenames are stored on disk in Unicode format.
quiet Turn on the quiet flag. Attempts to chown or chmod files do not return errors, although they fail. Use
with caution!
sys_immutable, showexec, dots, nodots, dotsOK=[yes|no]
Various misguided attempts to force Unix or DOS conventions onto a FAT file system.
Mount options for hfs
creator=cccc, type=cccc
Set the creator/type values as shown by the MacOS finder used for creating new files. Default values:
'????'.
uid=n, gid=n
Set the owner and group of all files. (Default: the uid and gid of the current process.)
dir_umask=n, file_umask=n, umask=n
Set the umask used for all directories, all regular files, or all files and directories. Defaults to the
umask of the current process.
session=n
Select the CDROM session to mount. Defaults to leaving that decision to the CDROM driver. This option
will fail with anything but a CDROM as underlying device.
part=n Select partition number n from the device. Only makes sense for CDROMS. Defaults to not parsing the par-
tition table at all.
quiet Don't complain about invalid mount options.
Mount options for hpfs
uid=value and gid=value
Set the owner and group of all files. (Default: the uid and gid of the current process.)
umask=value
Set the umask (the bitmask of the permissions that are not present). The default is the umask of the cur-
rent process. The value is given in octal.
case=lower / case=asis
Convert all files names to lower case, or leave them. (Default: case=lower.)
conv=binary / conv=text / conv=auto
For conv=text, delete some random CRs (in particular, all followed by NL) when reading a file. For
conv=auto, choose more or less at random between conv=binary and conv=text. For conv=binary, just read
what is in the file. This is the default.
nocheck
Do not abort mounting when certain consistency checks fail.
Mount options for iso9660
ISO 9660 is a standard describing a filesystem structure to be used on CD-ROMs. (This filesystem type is also
seen on some DVDs. See also the udf filesystem.)
Normal iso9660 filenames appear in a 8.3 format (i.e., DOS-like restrictions on filename length), and in addition
all characters are in upper case. Also there is no field for file ownership, protection, number of links, provi-
sion for block/character devices, etc.
Rock Ridge is an extension to iso9660 that provides all of these unix like features. Basically there are exten-
sions to each directory record that supply all of the additional information, and when Rock Ridge is in use, the
filesystem is indistinguishable from a normal UNIX file system (except that it is read-only, of course).
norock Disable the use of Rock Ridge extensions, even if available. Cf. map.
nojoliet
Disable the use of Microsoft Joliet extensions, even if available. Cf. map.
check=r[elaxed] / check=s[trict]
With check=relaxed, a filename is first converted to lower case before doing the lookup. This is probably
only meaningful together with norock and map=normal. (Default: check=strict.)
uid=value and gid=value
Give all files in the file system the indicated user or group id, possibly overriding the information
found in the Rock Ridge extensions. (Default: uid=0,gid=0.)
map=n[ormal] / map=o[ff] / map=a[corn]
For non-Rock Ridge volumes, normal name translation maps upper to lower case ASCII, drops a trailing `;1',
and converts `;' to `.'. With map=off no name translation is done. See norock. (Default: map=normal.)
map=acorn is like map=normal but also apply Acorn extensions if present.
mode=value
For non-Rock Ridge volumes, give all files the indicated mode. (Default: read permission for everybody.)
Since Linux 2.1.37 one no longer needs to specify the mode in decimal. (Octal is indicated by a leading
0.)
unhide Also show hidden and associated files. (If the ordinary files and the associated or hidden files have the
same filenames, this may make the ordinary files inaccessible.)
block=[512|1024|2048]
Set the block size to the indicated value. (Default: block=1024.)
conv=a[uto] / conv=b[inary] / conv=m[text] / conv=t[ext]
(Default: conv=binary.) Since Linux 1.3.54 this option has no effect anymore. (And non-binary settings
used to be very dangerous, possibly leading to silent data corruption.)
cruft If the high byte of the file length contains other garbage, set this mount option to ignore the high order
bits of the file length. This implies that a file cannot be larger than 16MB.
session=x
Select number of session on multisession CD. (Since 2.3.4.)
sbsector=xxx
Session begins from sector xxx. (Since 2.3.4.)
The following options are the same as for vfat and specifying them only makes sense when using discs encoded
using Microsoft's Joliet extensions.
iocharset=value
Character set to use for converting 16 bit Unicode characters on CD to 8 bit characters. The default is
iso8859-1.
utf8 Convert 16 bit Unicode characters on CD to UTF-8.
Mount options for jfs
iocharset=name
Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use
iocharset=utf8 for UTF8 translations. This requires CONFIG_NLS_UTF8 to be set in the kernel .config file.
resize=value
Resize the volume to value blocks. JFS only supports growing a volume, not shrinking it. This option is
only valid during a remount, when the volume is mounted read-write. The resize keyword with no value will
grow the volume to the full size of the partition.
nointegrity
Do not write to the journal. The primary use of this option is to allow for higher performance when
restoring a volume from backup media. The integrity of the volume is not guaranteed if the system abnor-
mally abends.
integrity
Default. Commit metadata changes to the journal. Use this option to remount a volume where the noin-
tegrity option was previously specified in order to restore normal behavior.
errors=continue / errors=remount-ro / errors=panic
Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system
erroneous and continue, or remount the file system read-only, or panic and halt the system.)
noquota / quota / usrquota / grpquota
These options are accepted but ignored.
Mount options for minix
None.
Mount options for msdos
See mount options for fat. If the msdos file system detects an inconsistency, it reports an error and sets the
file system read-only. The file system can be made writeable again by remounting it.
Mount options for ncpfs
Just like nfs, the ncpfs implementation expects a binary argument (a struct ncp_mount_data) to the mount system
call. This argument is constructed by ncpmount(8) and the current version of mount (2.12) does not know anything
about ncpfs.
Mount options for nfs
Instead of a textual option string, parsed by the kernel, the nfs file system expects a binary argument of type
struct nfs_mount_data. The program mount itself parses the following options of the form `tag=value', and puts
them in the structure mentioned: rsize=n, wsize=n, timeo=n, retrans=n, acregmin=n, acregmax=n, acdirmin=n,
acdirmax=n, actimeo=n, retry=n, port=n, mountport=n, mounthost=name, mountprog=n, mountvers=n, nfsprog=n,
nfsvers=n, namlen=n. The option addr=n is accepted but ignored. Also the following Boolean options, possibly
preceded by no are recognized: bg, fg, soft, hard, intr, posix, cto, ac, tcp, udp, lock, acl. For details, see
nfs(5).
Especially useful options include
rsize=8192,wsize=8192
This will make your nfs connection faster than with the default buffer size of 4096. (NFSv2 does not work
with larger values of rsize and wsize.)
hard The program accessing a file on a NFS mounted file system will hang when the server crashes. The process
cannot be interrupted or killed unless you also specify intr. When the NFS server is back online the pro-
gram will continue undisturbed from where it was. This is probably what you want.
soft This option allows the kernel to time out if the nfs server is not responding for some time. The time can
be specified with timeo=time. This option might be useful if your nfs server sometimes doesn't respond or
will be rebooted while some process tries to get a file from the server. Usually it just causes lots of
trouble.
nolock Do not use locking. Do not start lockd.
Mount options for ntfs
iocharset=name
Character set to use when returning file names. Unlike VFAT, NTFS suppresses names that contain uncon-
vertible characters. Deprecated.
nls=name
New name for the option earlier called iocharset.
utf8 Use UTF-8 for converting file names.
uni_xlate=[0|1|2]
For 0 (or `no' or `false'), do not use escape sequences for unknown Unicode characters. For 1 (or `yes'
or `true') or 2, use vfat-style 4-byte escape sequences starting with ":". Here 2 give a little-endian
encoding and 1 a byteswapped bigendian encoding.
posix=[0|1]
If enabled (posix=1), the file system distinguishes between upper and lower case. The 8.3 alias names are
presented as hard links instead of being suppressed.
uid=value, gid=value and umask=value
Set the file permission on the filesystem. The umask value is given in octal. By default, the files are
owned by root and not readable by somebody else.
Mount options for proc
uid=value and gid=value
These options are recognized, but have no effect as far as I can see.
Mount options for ramfs
Ramfs is a memory based filesystem. Mount it and you have it. Unmount it and it is gone. Present since Linux
2.3.99pre4. There are no mount options.
Mount options for reiserfs
Reiserfs is a journaling filesystem. The reiserfs mount options are more fully described at
http://www.namesys.com/mount-options.html.
conv Instructs version 3.6 reiserfs software to mount a version 3.5 file system, using the 3.6 format for newly
created objects. This file system will no longer be compatible with reiserfs 3.5 tools.
hash=rupasov / hash=tea / hash=r5 / hash=detect
Choose which hash function reiserfs will use to find files within directories.
rupasov
A hash invented by Yury Yu. Rupasov. It is fast and preserves locality, mapping lexicographically
close file names to close hash values. This option should not be used, as it causes a high proba-
bility of hash collisions.
tea A Davis-Meyer function implemented by Jeremy Fitzhardinge. It uses hash permuting bits in the
name. It gets high randomness and, therefore, low probability of hash collisions at some CPU cost.
This may be used if EHASHCOLLISION errors are experienced with the r5 hash.
r5 A modified version of the rupasov hash. It is used by default and is the best choice unless the
file system has huge directories and unusual file-name patterns.
detect Instructs mount to detect which hash function is in use by examining the file system being mounted,
and to write this information into the reiserfs superblock. This is only useful on the first mount
of an old format file system.
hashed_relocation
Tunes the block allocator. This may provide performance improvements in some situations.
no_unhashed_relocation
Tunes the block allocator. This may provide performance improvements in some situations.
noborder
Disable the border allocator algorithm invented by Yury Yu. Rupasov. This may provide performance
improvements in some situations.
nolog Disable journalling. This will provide slight performance improvements in some situations at the cost of
losing reiserfs's fast recovery from crashes. Even with this option turned on, reiserfs still performs
all journalling operations, save for actual writes into its journalling area. Implementation of nolog is
a work in progress.
notail By default, reiserfs stores small files and `file tails' directly into its tree. This confuses some utili-
ties such as LILO(8). This option is used to disable packing of files into the tree.
replayonly
Replay the transactions which are in the journal, but do not actually mount the file system. Mainly used
by reiserfsck.
resize=number
A remount option which permits online expansion of reiserfs partitions. Instructs reiserfs to assume that
the device has number blocks. This option is designed for use with devices which are under logical volume
management (LVM). There is a special resizer utility which can be obtained from
ftp://ftp.namesys.com/pub/reiserfsprogs.
user_xattr
Enable Extended User Attributes. See the attr(5) manual page.
acl Enable POSIX Access Control Lists. See the acl(5) manual page.
Mount options for romfs
None.
Mount options for smbfs
Just like nfs, the smbfs implementation expects a binary argument (a struct smb_mount_data) to the mount system
call. This argument is constructed by smbmount(8) and the current version of mount (2.12) does not know anything
about smbfs.
Mount options for sysv
None.
Mount options for tmpfs
The following parameters accept a suffix k, m or g for Ki, Mi, Gi (binary kilo, mega and giga) and can be changed
on remount.
size=nbytes
Override default maximum size of the filesystem. The size is given in bytes, and rounded down to entire
pages. The default is half of the memory.
nr_blocks=
Set number of blocks.
nr_inodes=
Set number of inodes.
mode= Set initial permissions of the root directory.
Mount options for udf
udf is the "Universal Disk Format" filesystem defined by the Optical Storage Technology Association, and is often
used for DVD-ROM. See also iso9660.
gid= Set the default group.
umask= Set the default umask. The value is given in octal.
uid= Set the default user.
unhide Show otherwise hidden files.
undelete
Show deleted files in lists.
nostrict
Unset strict conformance.
iocharset
Set the NLS character set.
bs= Set the block size. (May not work unless 2048.)
novrs Skip volume sequence recognition.
session=
Set the CDROM session counting from 0. Default: last session.
anchor=
Override standard anchor location. Default: 256.
volume=
Override the VolumeDesc location. (unused)
partition=
Override the PartitionDesc location. (unused)
lastblock=
Set the last block of the filesystem.
fileset=
Override the fileset block location. (unused)
rootdir=
Override the root directory location. (unused)
Mount options for ufs
ufstype=value
UFS is a file system widely used in different operating systems. The problem are differences among imple-
mentations. Features of some implementations are undocumented, so its hard to recognize the type of ufs
automatically. That's why the user must specify the type of ufs by mount option. Possible values are:
old Old format of ufs, this is the default, read only. (Don't forget to give the -r option.)
44bsd For filesystems created by a BSD-like system (NetBSD,FreeBSD,OpenBSD).
sun For filesystems created by SunOS or Solaris on Sparc.
sunx86 For filesystems created by Solaris on x86.
hp For filesystems created by HP-UX, read-only.
nextstep
For filesystems created by NeXTStep (on NeXT station) (currently read only).
nextstep-cd
For NextStep CDROMs (block_size == 2048), read-only.
openstep
For filesystems created by OpenStep (currently read only). The same filesystem type is also used
by Mac OS X.
onerror=value
Set behaviour on error:
panic If an error is encountered, cause a kernel panic.
[lock|umount|repair]
These mount options don't do anything at present; when an error is encountered only a console mes-
sage is printed.
Mount options for umsdos
See mount options for msdos. The dotsOK option is explicitly killed by umsdos.
Mount options for vfat
First of all, the mount options for fat are recognized. The dotsOK option is explicitly killed by vfat. Fur-
thermore, there are
uni_xlate
Translate unhandled Unicode characters to special escaped sequences. This lets you backup and restore
filenames that are created with any Unicode characters. Without this option, a '?' is used when no trans-
lation is possible. The escape character is ':' because it is otherwise illegal on the vfat filesystem.
The escape sequence that gets used, where u is the unicode character, is: ':', (u & 0x3f), ((u>>6) &
0x3f), (u>>12).
posix Allow two files with names that only differ in case.
nonumtail
First try to make a short name without sequence number, before trying name~num.ext.
utf8 UTF8 is the filesystem safe 8-bit encoding of Unicode that is used by the console. It can be be enabled
for the filesystem with this option. If `uni_xlate' gets set, UTF8 gets disabled.
shortname=[lower|win95|winnt|mixed]
Defines the behaviour for creation and display of filenames which fit into 8.3 characters. If a long name
for a file exists, it will always be preferred display. There are four modes:
lower Force the short name to lower case upon display; store a long name when the short name is not all
upper case.
win95 Force the short name to upper case upon display; store a long name when the short name is not all
upper case.
winnt Display the shortname as is; store a long name when the short name is not all lower case or all
upper case.
mixed Display the short name as is; store a long name when the short name is not all upper case.
The default is "lower".
Mount options for usbfs
devuid=uid and devgid=gid and devmode=mode
Set the owner and group and mode of the device files in the usbfs file system (default: uid=gid=0,
mode=0644). The mode is given in octal.
busuid=uid and busgid=gid and busmode=mode
Set the owner and group and mode of the bus directories in the usbfs file system (default: uid=gid=0,
mode=0555). The mode is given in octal.
listuid=uid and listgid=gid and listmode=mode
Set the owner and group and mode of the file devices (default: uid=gid=0, mode=0444). The mode is given in
octal.
Mount options for xenix
None.
Mount options for xfs
biosize=size
Sets the preferred buffered I/O size (default size is 64K). size must be expressed as the logarithm
(base2) of the desired I/O size. Valid values for this option are 14 through 16, inclusive (i.e. 16K,
32K, and 64K bytes). On machines with a 4K pagesize, 13 (8K bytes) is also a valid size. The preferred
buffered I/O size can also be altered on an individual file basis using the ioctl(2) system call.
dmapi / xdsm
Enable the DMAPI (Data Management API) event callouts. Use with the "mtpt" option.
mtpt=mountpoint
Use with the "dmapi" option. The value specified here will be included in the DMAPI mount event, and
should be the path of the actual mountpoint that is used.
logbufs=value
Set the number of in-memory log buffers. Valid numbers range from 2-8 inclusive. The default value is 8
buffers for filesystems with a blocksize of 64K, 4 buffers for filesystems with a blocksize of 32K, 3
buffers for filesystems with a blocksize of 16K, and 2 buffers for all other configurations. Increasing
the number of buffers may increase performance on some workloads at the cost of the memory used for the
additional log buffers and their associated control structures.
logbsize=value
Set the size of each in-memory log buffer. Valid sizes are 16384 (16K) and 32768 (32K). The default
value for machines with more than 32MB of memory is 32768, machines with less memory use 16384 by default.
logdev=device and rtdev=device
Use an external log (metadata journal) and/or real-time device. An XFS filesystem has up to three parts:
a data section, a log section, and a real-time section. The real-time section is optional, and the log
section can be separate from the data section or contained within it. Refer to xfs(5).
noalign
Data allocations will not be aligned at stripe unit boundaries.
noatime
Access timestamps are not updated when a file is read.
norecovery
The filesystem will be mounted without running log recovery. If the filesystem was not cleanly unmounted,
it is likely to be inconsistent when mounted in norecovery mode. Some files or directories may not be
accessible because of this. Filesystems mounted norecovery must be mounted read-only or the mount will
fail.
nouuid Ignore the filesystem uuid. This avoids errors for duplicate uuids.
osyncisdsync
Make writes to files opened with the O_SYNC flag set behave as if the O_DSYNC flag had been used instead.
This can result in better performance without compromising data safety. However if this option is in
effect, timestamp updates from O_SYNC writes can be lost if the system crashes.
quota / usrquota / uqnoenforce
User disk quota accounting enabled, and limits (optionally) enforced.
grpquota / gqnoenforce
Group disk quota accounting enabled and limits (optionally) enforced.
sunit=value and swidth=value
Used to specify the stripe unit and width for a RAID device or a stripe volume. value must be specified
in 512-byte block units. If this option is not specified and the filesystem was made on a stripe volume
or the stripe width or unit were specified for the RAID device at mkfs time, then the mount system call
will restore the value from the superblock. For filesystems that are made directly on RAID devices, these
options can be used to override the information in the superblock if the underlying disk layout changes
after the filesystem has been created. The swidth option is required if the sunit option has been speci-
fied, and must be a multiple of the sunit value.
Mount options for xiafs
None. Although nothing is wrong with xiafs, it is not used much, and is not maintained. Probably one shouldn't
use it. Since Linux version 2.1.21 xiafs is no longer part of the kernel source.
THE LOOP DEVICE
One further possible type is a mount via the loop device. For example, the command
mount /tmp/fdimage /mnt -t msdos -o loop=/dev/loop3,blocksize=1024
will set up the loop device /dev/loop3 to correspond to the file /tmp/fdimage, and then mount this device on
/mnt.
This type of mount knows about 10 options, namely loop, offset, sizelimit, encryption, pseed, phash, loinit,
gpgkey, gpghome and itercountk that are really options to losetup(8). (These options can be used in addition to
those specific to the filesystem type.)
If the mount requires a passphrase, you will be prompted for one unless you specify a file descriptor to read
from instead with the -p option. If no explicit loop device is mentioned (but just an option `-o loop' is
given), then mount will try to find some unused loop device and use that. If you are not so unwise as to make
/etc/mtab a symbolic link to /proc/mounts then any loop device allocated by mount will be freed by umount. You
can also free a loop device by hand, using `losetup -d', see losetup(8).
RETURN CODES
mount has the following return codes (the bits can be ORed):
0 success
1 incorrect invocation or permissions
2 system error (out of memory, cannot fork, no more loop devices)
4 internal mount bug or missing nfs support in mount
8 user interrupt
16 problems writing or locking /etc/mtab
32 mount failure
64 some mount succeeded
FILES
/etc/fstab file system table
/etc/mtab table of mounted file systems
/etc/mtab~ lock file
/etc/mtab.tmp temporary file
/etc/filesystems a list of filesystem types to try
RELATED
mount(2), umount(2), fstab(5), umount(8), swapon(8), nfs(5), xfs(5), e2label(8), xfs_admin(8), mountd(8), nfsd(8), mke2fs(8), tune2fs(8), losetup(8)
BUGS
It is possible for a corrupted file system to cause a crash.
Some Linux file systems don't support -o sync and -o dirsync (the ext2 and ext3 file systems do support syn-
chronous updates (a la BSD) when mounted with the sync option).
The -o remount may not be able to change mount parameters (all ext2fs-specific parameters, except sb, are change-
able with a remount, for example, but you can't change gid or umask for the fatfs).
Mount by label or uuid will work only if your devices have the names listed in /proc/partitions. In particular,
it may well fail if the kernel was compiled with devfs but devfs is not mounted.
HISTORY
A mount command existed in Version 5 AT&T UNIX.