From Linux Man Pages
xfs_db - debug an XFS filesystem
SYNOPSIS
xfs_db [ -c cmd ] ... [ -p prog ] [ -r ] [ -x ] xfs_special
xfs_db -f [ -c cmd ] ... [ -p prog ] [ -f ] [ -r ] [ -x ] file
DESCRIPTION
xfs_db is used to examine an XFS filesystem. Under rare circumstances it can also be used to modify an XFS
filesystem, but that task is normally left to xfs_repair(8) or to scripts such as xfs_admin that run xfs_db.
The options to xfs_db are:
-c cmd xfs_db commands may be run interactively (the default) or as arguments on the command line. Multiple
-c arguments may be given. The commands are run in the sequence given, then the program exits. This
is the mechanism used to implement xfs_check(8).
-f Specifies that the filesystem image to be processed is stored in a regular file (see the mkfs.xfs -d
file option). This might happen if an image copy of a filesystem has been made into an ordinary file
with xfs_copy(8).
-l Specifies the device special file where the filesystems external log resides. Only for those filesys-
tems which use an external log. See the mkfs.xfs -l option, and refer to xfs(5) for a detailed
description of the XFS log.
-i Allows execution on a mounted filesystem, provided it is mounted read-only. Useful for shell scripts
such as xfs_check(8), which must only operate on filesystems in a guarenteed consistent state (either
unmounted or mounted read-only). These semantics are slightly different to that of the -r option.
-p prog Set the program name for prompts and some error messages, the default value is xfs_db.
-r Open file or xfs_special read-only. This option is required if xfs_special is a mounted filesystem.
It is only necessary to omit this flag if a command that changes data (write, blocktrash) is to be
used.
-x Specifies expert mode. This enables the write command.
CONCEPTS
xfs_db commands can be broken up into two classes. Most commands are for the navigation and display of data
structures in the filesystem. Other commands are for scanning the filesystem in some way.
Commands which are used to navigate the filesystem structure take arguments which reflect the names of filesystem
structure fields. There can be multiple field names separated by dots when the underlying structures are nested,
as in C. The field names can be indexed (as an array index) if the underlying field is an array. The array
indices can be specified as a range, two numbers separated by a dash.
xfs_db maintains a current address in the filesystem. The granularity of the address is a filesystem structure.
This can be a filesystem block, an inode or quota (smaller than a filesystem block), or a directory block (could
be larger than a filesystem block). There are a variety of commands to set the current address. Associated with
the current address is the current data type, which is the structural type of this data. Commands which follow
the structure of the filesystem always set the type as well as the address. Commands which examine pieces of an
individual file (inode) need the current inode to be set, this is done with the inode command.
The current address/type information is actually maintained in a stack that can be explicitly manipulated with
the push, pop, and stack commands. This allows for easy examination of a nested filesystem structure. Also, the
last several locations visited are stored in a ring buffer which can be manipulated with the forward, back, and
ring commands.
XFS filesystems are divided into a small number of allocation groups. xfs_db maintains a notion of the current
allocation group which is manipulated by some commands. The initial allocation group is 0.
COMMANDS
Many commands have extensive online help. Use the help command for more details on any command.
a See the addr command.
ablock filoff
Set current address to the offset filoff (a filesystem block number) in the attribute area of the cur-
rent inode.
addr [ field-expression ]
Set current address to the value of the field-expression. This is used to ``follow a reference in
one structure to the object being referred to. If no argument is given the current address is printed.
agf [ agno ]
Set current address to the AGF block for allocation group agno. If no argument is given use the cur-
rent allocation group.
agfl [ agno ]
Set current address to the AGFL block for allocation group agno. If no argument is given use the cur-
rent allocation group.
agi [ agno ]
Set current address to the AGI block for allocation group agno. If no argument is given use the cur-
rent allocation group.
b See the back command.
back Move to the previous location in the position ring.
blockfree Free block usage information collected by the last execution of the blockget command. This must be
done before another blockget command can be given, presumably with different arguments than the previ-
ous one.
blockget [ -npsv ] [ -b bno ] ... [ -i ino ] ...
Get block usage and check filesystem consistency. The information is saved for use by a subsequent
blockuse, ncheck, or blocktrash command. See xfs_check(8) for more information.
The -b option is used to specify filesystem block numbers about which verbose information should be
printed.
The -i option is used to specify inode numbers about which verbose information should be printed.
The -n option is used to save pathnames for inodes visited, this is used to support the xfs_ncheck(8)
command. It also means that pathnames will be printed for inodes that have problems. This option uses
a lot of memory so is not enabled by default.
The -p option causes error messages to be prefixed with the filesystem name being processed. This is
useful if several copies of xfs_db are run in parallel.
The -s option restricts output to severe errors only. This is useful if the output is too long other-
wise.
The -v option enables verbose output. Messages will be printed for every block and inode processed.
blocktrash [ -n c ] [ -x a ] [ -y b ] [ -s s ] [ -0123 ] [ -t t ] ...
Trash randomly selected filesystem metadata blocks. Trashing occurs to randomly selected bits in the
chosen blocks. This command is available only in debugging versions of xfs_db. It is useful for test-
ing xfs_repair(8) and xfs_check(8).
The -0, -1, -2, and -3 options (mutually exclusive) set the operating mode for blocktrash. In -0 mode,
changed bits are cleared. In -1 mode, changed bits are set. In -2 mode, changed bits are inverted.
In -3 mode, changed bits are randomized.
The -n option supplies the count of block-trashings to perform (default 1).
The -s option supplies a seed to the random processing.
The -t option gives a type of blocks to be selected for trashing. Multiple -t options may be given.
If no -t options are given then all metadata types can be trashed.
The -x option sets the minimum size of bit range to be trashed. The default value is 1.
The -y option sets the maximum size of bit range to be trashed. The default value is 1024.
blockuse [ -n ] [ -c blockcount ]
Print usage for current filesystem block(s). For each block, the type and (if any) inode are printed.
The -c option specifies a count of blocks to process. The default value is 1 (the current block only).
The -n option specifies that file names should be printed. The prior blockget command must have also
specified the -n option.
bmap [ -a ] [ -d ] [ block [ len ] ]
Show the block map for the current inode. The map display can be restricted to an area of the file
with the block and len arguments. If block is given and len is omitted then 1 is assumed for len.
The -a and -d options are used to select the attribute or data area of the inode, if neither option is
given then both areas are shown.
check See the blockget command.
convert type number [ type number ] ... type
Convert from one address form to another. The known types, with alternate names, are: agblock or agbno
(filesystem block within an allocation group), agino or aginode (inode number within an allocation
group), agnumber or agno (allocation group number), bboff or daddroff (byte offset in a daddr), blkoff
or fsboff or agboff (byte offset in a agblock or fsblock), byte or fsbyte (byte address in filesystem),
daddr or bb (disk address, 512-byte blocks), fsblock or fsb or fsbno (filesystem block, see the fsblock
command), ino or inode (inode number), inoidx or offset (index of inode in filesystem block), and
inooff or inodeoff (byte offset in inode). Only conversions that ``make sense are allowed. The com-
pound form (with more than three arguments) is useful for conversions such as convert agno ag agbno agb
fsblock.
daddr [ d ]
Set current address to the daddr (512 byte block) given by d. If no value for d is given the current
address is printed, expressed as a daddr. The type is set to data (uninterpreted).
dblock filoff
Set current address to the offset filoff (a filesystem block number) in the data area of the current
inode.
debug [ flagbits ]
Set debug option bits. These are used for debugging xfs_db. If no value is given for flagbits, print
the current debug option bits. These are for the use of the implementor.
dquot [ projectid_or_userid ]
Set current address to a project or user quota block.
echo [ arg ] ...
Echo the arguments to the output.
f See the forward command.
forward Move forward to the next entry in the position ring.
frag [ -adflqRrv ]
Get file fragmentation data. This prints information about fragmentation of file data in the filesys-
tem (as opposed to fragmentation of freespace, for which see the freesp command). Every file in the
filesystem is examined to see how far from ideal its extent mappings are. A summary is printed giving
the totals.
The -v option sets verbosity, every inode has information printed for it. The remaining options select
which inodes and extents are examined. If no options are given then all are assumed set, otherwise
just those given are enabled.
The -a option enables processing of attribute data.
The -d option enables processing of directory data.
The -f option enables processing of regular file data.
The -l option enables processing of symbolic link data.
The -q option enables processing of quota file data.
The -R option enables processing of realtime control file data.
The -r option enables processing of realtime file data.
freesp [ -bcds ] [ -a a ] ... [ -e i ] [ -h h1 ] ... [ -m m ]
Summarize free space for the filesystem. The free blocks are examined and totalled, and displayed in
the form of a histogram, with a count of extents in each range of free extent sizes.
The -a a option adds a to the list of allocation groups to be processed. If no -a options are given
then all allocation groups are processed.
The -b option specifies that the histogram buckets are binary-sized, with the starting sizes being the
powers of 2.
The -c option specifies that freesp will search the by-size (cnt) space Btree instead of the default
by-block (bno) space Btree.
The -d option specifies that every free extent will be displayed.
The -e i option specifies that the histogram buckets are equal-sized, with the size specified as i.
The -h h1 option specifies a starting block number for a histogram bucket as h1. Multiple -h options
are given to specify the complete set of buckets.
The -m m option specifies that the histogram starting block numbers are powers of m. This is the gen-
eral case of -b.
The -s option specifies that a final summary of total free extents, free blocks, and the average free
extent size is printed.
fsb See the fsblock command.
fsblock [ fsb ]
Set current address to the fsblock value given by fsb. If no value for fsb is given the current
address is printed, expressed as an fsb. The type is set to data (uninterpreted). XFS filesystem
block numbers are computed ((agno << agshift) | agblock) where agshift depends on the size of an allo-
cation group. Use the convert command to convert to and from this form. Block numbers given for file
blocks (for instance from the bmap command) are in this form.
hash string
Prints the hash value of string using the hash function of the XFS directory and attribute implementa-
tion.
help [ command ]
Print help for one or all commands.
inode [ inode# ]
Set the current inode number. If no inode# is given, print the current inode number.
label [ label ]
Set the filesystem label. The filesystem label can be used by mount(8) instead of using a device spe-
cial file. The maximum length of an XFS label is 12 characters - use of a longer label will result in
truncation and a warning will be issued. If no label is given, the current filesystem label is
printed.
log [ stop | start filename ]
Start logging output to filename, stop logging, or print the current logging status.
ncheck [ -s ] [ -i ino ] ...
Print name-inode pairs. A blockget -n command must be run first to gather the information.
The -i option specifies an inode number to be printed. If no -i options are given then all inodes are
printed.
The -s option specifies that only setuid and setgid files are printed.
p See the print command.
pop Pop location from the stack.
print [ field-expression ] ...
Print field values. If no argument is given, print all fields in the current structure.
push [ command ]
Push location to the stack. If command is supplied, set the current location to the results of command
after pushing the old location.
q See the quit command.
quit Exit xfs_db.
ring [ index ]
Show position ring (if no index argument is given), or move to a specific entry in the position ring
given by index.
sb [ agno ]
Set current address to SB header in allocation group agno. If no agno is given use the current alloca-
tion group number.
source source-file
Process commands from source-file. source commands can be nested.
stack View the location stack.
type [ type ]
Set the current data type to type. If no argument is given, show the current data type. The possible
data types are: agf, agfl, agi, attr, bmapbta, bmapbtd, bnobt, cntbt, data, dir, dir2, dqblk, inobt,
inode, log, rtbitmap, rtsummary, sb, symlink, and text. See the TYPES section below for more informa-
tion on these data types.
uuid [ uuid or generate or rewrite ]
Set the filesystem universally unique identifier (UUID). The filesystem UUID can be used by mount(8)
instead of using a device special file. The uuid can be set directly to the desired UUID, or it can be
automatically generated using the generate option. These options will both write the UUID into every
copy of the superblock in the filesystem. rewrite copies the current UUID from the primary superblock
to all secondary copies of the superblock. If no argument is given, the current filesystem UUID is
printed.
version [ feature | [versionnum features2 ] ]
Enable selected features for a filesystem (certain features can be enabled on an unmounted filesystem,
after mkfs.xfs(8) has created the filesystem). Support for unwritten extents can be enabled using the
extflg option. Support for version 2 log format can be enabled using the log2 option. Support for
extended attributes can be enabled using the attr1 or attr2 option. Once enabled, extended attributes
cannot be disabled, but the user may toggle between attr1 and attr2 at will (older kernels may not sup-
port the newer version).
With one argument, this command will write the updated version number into every copy of the superblock
in the filesystem. If no argument is given, the current version and feature bits are printed. If two
arguments are given, they will be used as numeric values for the versionnum and features2 bits respec-
tively, and their string equivalent reported (but no modifications are made).
write [ field or value ] ...
Write a value to disk. Specific fields can be set in structures (struct mode), or a block can be set
to data values (data mode), or a block can be set to string values (string mode, for symlink blocks).
The operation happens immediately: there is no buffering.
Struct mode is in effect when the current type is structural, i.e. not data. For struct mode, the syn-
tax is ``write field value''.
Data mode is in effect when the current type is data. In this case the contents of the block can be
shifted or rotated left or right, or filled with a sequence, a constant value, or a random value. In
this mode write with no arguments gives more information on the allowed commands.
TYPES
This section gives the fields in each structure type and their meanings. Note that some types of block cover
multiple actual structures, for instance directory blocks.
agf The AGF block is the header for block allocation information; it is in the second 512-byte block of
each allocation group. The following fields are defined:
magicnum: AGF block magic number, 0x58414746 ('XAGF')
versionnum: version number, currently 1
seqno: sequence number starting from 0
length: size in filesystem blocks of the allocation group. All allocation groups except the last one
of the filesystem have the superblock's agblocks value here
bnoroot: block number of the root of the Btree holding free space information sorted by block number
cntroot: block number of the root of the Btree holding free space information sorted by block count
bnolevel: number of levels in the by-block-number Btree
cntlevel: number of levels in the by-block-count Btree
flfirst: index into the AGFL block of the first active entry
fllast: index into the AGFL block of the last active entry
flcount: count of active entries in the AGFL block
freeblks: count of blocks represented in the freespace Btrees
longest: longest free space represented in the freespace Btrees
agfl The AGFL block contains block numbers for use of the block allocator; it is in the fourth 512-byte
block of each allocation group. Each entry in the active list is a block number within the allocation
group that can be used for any purpose if space runs low. The AGF block fields flfirst, fllast, and
flcount designate which entries are currently active. Entry space is allocated in a circular manner
within the AGFL block. Fields defined:
bno: array of all block numbers. Even those which are not active are printed
agi The AGI block is the header for inode allocation information; it is in the third 512-byte block of each
allocation group. Fields defined:
magicnum: AGI block magic number, 0x58414749 ('XAGI')
versionnum: version number, currently 1
seqno: sequence number starting from 0
length: size in filesystem blocks of the allocation group
count: count of inodes allocated
root: block number of the root of the Btree holding inode allocation information
level: number of levels in the inode allocation Btree
freecount: count of allocated inodes that are not in use
newino: last inode number allocated
dirino: unused
unlinked: an array of inode numbers within the allocation group. The entries in the AGI block are the
heads of lists which run through the inode next_unlinked field. These inodes are to be unlinked the
next time the filesystem is mounted
attr An attribute fork is organized as a Btree with the actual data embedded in the leaf blocks. The root
of the Btree is found in block 0 of the fork. The index (sort order) of the Btree is the hash value of
the attribute name. All the blocks contain a blkinfo structure at the beginning, see type dir for a
description. Nonleaf blocks are identical in format to those for version 1 and version 2 directories,
see type dir for a description. Leaf blocks can refer to ``local or ``remote attribute values.
Local values are stored directly in the leaf block. Remote values are stored in an independent block
in the attribute fork (with no structure). Leaf blocks contain the following fields:
hdr: header containing a blkinfo structure info (magic number 0xfbee), a count of active entries, used-
bytes total bytes of names and values, the firstused byte in the name area, holes set if the block
needs compaction, and array freemap as for dir leaf blocks
entries: array of structures containing a hashval, nameidx (index into the block of the name), and
flags incomplete, root, and local
nvlist: array of structures describing the attribute names and values. Fields always present: valuelen
(length of value in bytes), namelen, and name. Fields present for local values: value (value string).
Fields present for remote values: valueblk (fork block number of containing the value).
bmapbt Files with many extents in their data or attribute fork will have the extents described by the contents
of a Btree for that fork, instead of being stored directly in the inode. Each bmap Btree starts with a
root block contained within the inode. The other levels of the Btree are stored in filesystem blocks.
The blocks are linked to sibling left and right blocks at each level, as well as by pointers from par-
ent to child blocks. Each block contains the following fields:
magic: bmap Btree block magic number, 0x424d4150 ('BMAP')
level: level of this block above the leaf level
numrecs: number of records or keys in the block
leftsib: left (logically lower) sibling block, 0 if none
rightsib: right (logically higher) sibling block, 0 if none
recs: [leaf blocks only] array of extent records. Each record contains startoff, startblock, block-
count, and extentflag (1 if the extent is unwritten)
keys: [nonleaf blocks only] array of key records. These are the first key value of each block in the
level below this one. Each record contains startoff
ptrs: [nonleaf blocks only] array of child block pointers. Each pointer is a filesystem block number
to the next level in the Btree
bnobt There is one set of filesystem blocks forming the by-block-number allocation Btree for each allocation
group. The root block of this Btree is designated by the bnoroot field in the coresponding AGF block.
The blocks are linked to sibling left and right blocks at each level, as well as by pointers from par-
ent to child blocks. Each block has the following fields:
magic: BNOBT block magic number, 0x41425442 ('ABTB')
level: level number of this block, 0 is a leaf
numrecs: number of data entries in the block
leftsib: left (logically lower) sibling block, 0 if none
rightsib: right (logically higher) sibling block, 0 if none
recs: [leaf blocks only] array of freespace records. Each record contains startblock and blockcount
keys: [nonleaf blocks only] array of key records. These are the first value of each block in the level
below this one. Each record contains startblock and blockcount
ptrs: [nonleaf blocks only] array of child block pointers. Each pointer is a block number within the
allocation group to the next level in the Btree
cntbt There is one set of filesystem blocks forming the by-block-count allocation Btree for each allocation
group. The root block of this Btree is designated by the coresponding AGF block. The blocks are
linked to sibling left and right blocks at each level, as well as by pointers from parent to child
blocks. Each block has the following fields:
magic: CNTBT block magic number, 0x41425443 ('ABTC')
level: level number of this block, 0 is a leaf
numrecs: number of data entries in the block
leftsib: left (logically lower) sibling block, 0 if none
rightsib: right (logically higher) sibling block, 0 if none
recs: [leaf blocks only] array of freespace records. Each record contains startblock and blockcount
keys: [nonleaf blocks only] array of key records. These are the first value of each block in the level
below this one. Each record contains blockcount and startblock
ptrs: [nonleaf blocks only] array of child block pointers. Each pointer is a block number within the
allocation group to the next level in the Btree
data User file blocks, and other blocks whose type is unknown, have this type for display purposes in
xfs_db. The block data is displayed in hexadecimal format.
dir A version 1 directory is organized as a Btree with the directory data embedded in the leaf blocks. The
root of the Btree is found in block 0 of the file. The index (sort order) of the Btree is the hash
value of the entry name. All the blocks contain a blkinfo structure at the beginning with the follow-
ing fields:
forw: next sibling block
back: previous sibling block
magic: magic number for this block type
The nonleaf (node) blocks have the following fields:
hdr: header containing a blkinfo structure info (magic number 0xfebe), the count of active entries, and
the level of this block above the leaves
btree: array of entries containing hashval and before fields. The before value is a block number
within the directory file to the child block, the hashval is the last hash value in that block
The leaf blocks have the following fields:
hdr: header containing a blkinfo structure info (magic number 0xfeeb), the count of active entries,
namebytes (total name string bytes), holes flag (block needs compaction), and freemap (array of base,
size entries for free regions)
entries: array of structures containing hashval, nameidx (byte index into the block of the name
string), and namelen
namelist: array of structures containing inumber and name
dir2 A version 2 directory has four kinds of blocks. Data blocks start at offset 0 in the file. There are
two kinds of data blocks: single-block directories have the leaf information embedded at the end of the
block, data blocks in multi-block directories do not. Node and leaf blocks start at offset 32GiB (with
either a single leaf block or the root node block). Freespace blocks start at offset 64GiB. The node
and leaf blocks form a Btree, with references to the data in the data blocks. The freespace blocks
form an index of longest free spaces within the data blocks.
A single-block directory block contains the following fields:
bhdr: header containing magic number 0x58443242 ('XD2B') and an array bestfree of the longest 3 free
spaces in the block (offset, length)
bu: array of union structures. Each element is either an entry or a freespace. For entries, there are
the following fields: inumber, namelen, name, and tag. For freespace, there are the following fields:
freetag (0xffff), length, and tag. The tag value is the byte offset in the block of the start of the
entry it is contained in
bleaf: array of leaf entries containing hashval and address. The address is a 64-bit word offset into
the file
btail: tail structure containing the total count of leaf entries and stale count of unused leaf entries
A data block contains the following fields:
dhdr: header containing magic number 0x58443244 ('XD2D') and an array bestfree of the longest 3 free
spaces in the block (offset, length)
du: array of union structures as for bu
Leaf blocks have two possible forms. If the Btree consists of a single leaf then the freespace infor-
mation is in the leaf block, otherwise it is in separate blocks and the root of the Btree is a node
block. A leaf block contains the following fields:
lhdr: header containing a blkinfo structure info (magic number 0xd2f1 for the single leaf case, 0xd2ff
for the true Btree case), the total count of leaf entries, and stale count of unused leaf entries
lents: leaf entries, as for bleaf
lbests: [single leaf only] array of values which represent the longest freespace in each data block in
the directory
ltail: [single leaf only] tail structure containing bestcount count of lbests
A node block is identical to that for types attr and dir.
A freespace block contains the following fields:
fhdr: header containing magic number 0x58443246 ('XD2F'), firstdb first data block number covered by
this freespace block, nvalid number of valid entries, and nused number of entries representing real
data blocks
fbests: array of values as for lbests
dqblk The quota information is stored in files referred to by the superblock uquotino and pquotino fields.
Each filesystem block in a quota file contains a constant number of quota entries. The quota entry
size is currently 136 bytes, so with a 4KiB filesystem block size there are 30 quota entries per block.
The dquot command is used to locate these entries in the filesystem. The file entries are indexed by
the user or project identifier to determine the block and offset. Each quota entry has the following
fields:
magic: magic number, 0x4451 ('DQ')
version: version number, currently 1
flags: flags, values include 0x01 for user quota, 0x02 for project quota
id: user or project identifier
blk_hardlimit: absolute limit on blocks in use
blk_softlimit: preferred limit on blocks in use
ino_hardlimit: absolute limit on inodes in use
ino_softlimit: preferred limit on inodes in use
bcount: blocks actually in use
icount: inodes actually in use
itimer: time when service will be refused if soft limit is violated for inodes
btimer: time when service will be refused if soft limit is violated for blocks
iwarns: number of warnings issued about inode limit violations
bwarns: number of warnings issued about block limit violations
rtb_hardlimit: absolute limit on realtime blocks in use
rtb_softlimit: preferred limit on realtime blocks in use
rtbcount: realtime blocks actually in use
rtbtimer: time when service will be refused if soft limit is violated for realtime blocks
rtbwarns: number of warnings issued about realtime block limit violations
inobt There is one set of filesystem blocks forming the inode allocation Btree for each allocation group.
The root block of this Btree is designated by the root field in the coresponding AGI block. The blocks
are linked to sibling left and right blocks at each level, as well as by pointers from parent to child
blocks. Each block has the following fields:
magic: INOBT block magic number, 0x49414254 ('IABT')
level: level number of this block, 0 is a leaf
numrecs: number of data entries in the block
leftsib: left (logically lower) sibling block, 0 if none
rightsib: right (logically higher) sibling block, 0 if none
recs: [leaf blocks only] array of inode records. Each record contains startino allocation-group rela-
tive inode number, freecount count of free inodes in this chunk, and free bitmap, LSB corresponds to
inode 0
keys: [nonleaf blocks only] array of key records. These are the first value of each block in the level
below this one. Each record contains startino
ptrs: [nonleaf blocks only] array of child block pointers. Each pointer is a block number within the
allocation group to the next level in the Btree
inode Inodes are allocated in ``chunks of 64 inodes each. Usually a chunk is multiple filesystem blocks,
although there are cases with large filesystem blocks where a chunk is less than one block. The inode
Btree (see inobt above) refers to the inode numbers per allocation group. The inode numbers directly
reflect the location of the inode block on disk. Use the inode command to point xfs_db to a specific
inode. Each inode contains four regions: core, next_unlinked, u, and a. core contains the fixed
information. next_unlinked is separated from the core due to journaling considerations, see type agi
field unlinked. u is a union structure that is different in size and format depending on the type and
representation of the file data (``data fork). a is an optional union structure to describe
attribute data, that is different in size, format, and location depending on the presence and represen-
tation of attribute data, and the size of the u data (``attribute fork). xfs_db automatically
selects the proper union members based on information in the inode.
The following are fields in the inode core:
magic: inode magic number, 0x494e ('IN')
mode: mode and type of file, as described in chmod(2), mknod(2), and stat(2)
version: inode version, 1 or 2
format: format of u union data (0: xfs_dev_t, 1: local file - in-inode directory or symlink, 2: extent
list, 3: Btree root, 4: unique id [unused])
nlinkv1: number of links to the file in a version 1 inode
nlinkv2: number of links to the file in a version 2 inode
projid: owner's project id (version 2 inode only)
uid: owner's user id
gid: owner's group id
atime: time last accessed (seconds and nanoseconds)
mtime: time last modified
ctime: time created or inode last modified
size: number of bytes in the file
nblocks: total number of blocks in the file including indirect and attribute
extsize: basic/minimum extent size for the file
nextents: number of extents in the data fork
naextents: number of extents in the attribute fork
forkoff: attribute fork offset in the inode, in 64-bit words from the start of u
aformat: format of a data (1: local attribute data, 2: extent list, 3: Btree root)
dmevmask: DMAPI event mask
dmstate: DMAPI state information
newrtbm: file is the realtime bitmap and is ``new format
prealloc: file has preallocated data space after EOF
realtime: file data is in the realtime subvolume
gen: inode generation number
The following fields are in the u data fork union:
bmbt: bmap Btree root. This looks like a bmapbtd block with redundant information removed
bmx: array of extent descriptors
dev: dev_t for the block or character device
sfdir: shortform (in-inode) version 1 directory. This consists of a hdr containing the parent inode
number and a count of active entries in the directory, followed by an array list of hdr.count entries.
Each such entry contains inumber, namelen, and name string
sfdir2: shortform (in-inode) version 2 directory. This consists of a hdr containing a count of active
entries in the directory, an i8count of entries with inumbers that don't fit in a 32-bit value, and the
parent inode number, followed by an array list of hdr.count entries. Each such entry contains namelen,
a saved offset used when the directory is converted to a larger form, a name string, and the inumber
symlink: symbolic link string value
The following fields are in the a attribute fork union if it exists:
bmbt: bmap Btree root, as above
bmx: array of extent descriptors
sfattr: shortform (in-inode) attribute values. This consists of a hdr containing a totsize (total size
in bytes) and a count of active entries, followed by an array list of hdr.count entries. Each such
entry contains namelen, valuelen, root flag, name, and value
log Log blocks contain the journal entries for XFS. It's not useful to examine these with xfs_db, use
xfs_logprint(8) instead.
rtbitmap If the filesystem has a realtime subvolume, then the rbmino field in the superblock refers to a file
that contains the realtime bitmap. Each bit in the bitmap file controls the allocation of a single
realtime extent (set == free). The bitmap is processed in 32-bit words, the LSB of a word is used for
the first extent controlled by that bitmap word. The atime field of the realtime bitmap inode contains
a counter that is used to control where the next new realtime file will start.
rtsummary If the filesystem has a realtime subvolume, then the rsumino field in the superblock refers to a file
that contains the realtime summary data. The summary file contains a two-dimensional array of 16-bit
values. Each value counts the number of free extent runs (consecutive free realtime extents) of a
given range of sizes that starts in a given bitmap block. The size ranges are binary buckets (low size
in the bucket is a power of 2). There are as many size ranges as are necessary given the size of the
realtime subvolume. The first dimension is the size range, the second dimension is the starting bitmap
block number (adjacent entries are for the same size, adjacent bitmap blocks).
sb There is one sb (superblock) structure per allocation group. It is the first disk block in the alloca-
tion group. Only the first one (block 0 of the filesystem) is actually used; the other blocks are
redundant information for xfs_repair(8) to use if the first superblock is damaged. Fields defined:
magicnum: superblock magic number, 0x58465342 ('XFSB')
blocksize: filesystem block size in bytes
dblocks: number of filesystem blocks present in the data subvolume
rblocks: number of filesystem blocks present in the realtime subvolume
rextents: number of realtime extents that rblocks contain
uuid: unique identifier of the filesystem
logstart: starting filesystem block number of the log (journal). If this value is 0 the log is
``external
rootino: root inode number
rbmino: realtime bitmap inode number
rsumino: realtime summary data inode number
rextsize: realtime extent size in filesystem blocks
agblocks: size of an allocation group in filesystem blocks
agcount: number of allocation groups
rbmblocks: number of realtime bitmap blocks
logblocks: number of log blocks (filesystem blocks)
versionnum: filesystem version information. This value is currently 1, 2, 3, or 4 in the low 4 bits.
If the low bits are 4 then the other bits have additional meanings. 1 is the original value. 2 means
that attributes were used. 3 means that version 2 inodes (large link counts) were used. 4 is the bit-
mask version of the version number. In this case, the other bits are used as flags (0x0010: attributes
were used, 0x0020: version 2 inodes were used, 0x0040: quotas were used, 0x0080: inode cluster align-
ment is in force, 0x0100: data stripe alignment is in force, 0x0200: the shared_vn field is used,
0x1000: unwritten extent tracking is on, 0x2000: version 2 directories are in use)
sectsize: sector size in bytes, currently always 512. This is the size of the superblock and the other
header blocks
inodesize: inode size in bytes
inopblock: number of inodes per filesystem block
fname: obsolete, filesystem name
fpack: obsolete, filesystem pack name
blocklog: log2 of blocksize
sectlog: log2 of sectsize
inodelog: log2 of inodesize
inopblog: log2 of inopblock
agblklog: log2 of agblocks (rounded up)
rextslog: log2 of rextents
inprogress: mkfs.xfs(8) aborted before completing this filesystem
imax_pct: maximum percentage of filesystem space used for inode blocks
icount: number of allocated inodes
ifree: number of allocated inodes that are not in use
fdblocks: number of free data blocks
frextents: number of free realtime extents
uquotino: user quota inode number
pquotino: project quota inode number; this is currently unused
qflags: quota status flags (0x01: user quota accounting is on, 0x02: user quota limits are enforced,
0x04: quotacheck has been run on user quotas, 0x08: project quota accounting is on, 0x10: project quota
limits are enforced, 0x20: quotacheck has been run on project quotas)
flags: random flags. 0x01: only read-only mounts are allowed
shared_vn: shared version number (shared readonly filesystems)
inoalignmt: inode chunk alignment in filesystem blocks
unit: stripe or RAID unit
width: stripe or RAID width
dirblklog: log2 of directory block size (filesystem blocks)
symlink Symbolic link blocks are used only when the symbolic link value does not fit inside the inode. The
block content is just the string value. Bytes past the logical end of the symbolic link value have
arbitrary values.
text User file blocks, and other blocks whose type is unknown, have this type for display purposes in
xfs_db. The block data is displayed in two columns: Hexadecimal format and printable ASCII chars.
DIAGNOSTICS
Many messages can come from the check (blockget) command; these are documented in xfs_check(8).
RELATED
mkfs.xfs(8), xfs_admin(8), xfs_check(8), xfs_copy(8), xfs_logprint(8), xfs_ncheck(8), xfs_repair(8), mount(8),
chmod(2), mknod(2), stat(2), xfs(5).
CATEGORY